Easy One Button Take-Off/Landing
10 MIN Flight Time
Use the remote control or connect to your phone to take off and land with one touch.
Altitude hold function
The hover function minimizes shaking and increases in-flight stability.
The Z4 features a foldable chassis for easy transport and storage.
The quadcopter has two different modes (fast/slow) and is easy for beginners to control.
Smart remote control
The quadcopter can operate within a range of 30 metres from the controller.
360° flip function
Hold down the stunt button on the controller to make the quadcopter perform a 360-degree flip.
Left/right spin function
Hold down the spin button on the controller and move the right-hand joystick to the left or right to make the quadcopter spin to the left or right.
Spin and return to original position
Hold down the spin button on the controller and move the right-hand joystick up or down to make the quadcopter spin left or right and return to its original position.
In headless mode, the quadcopter will align its movements relative to the controller.
Two-tier protection mechanism
If the propellers collide with another object or become stuck,the quadcopter’s circuit will engage the overcurrent protection mechanism.
If the four indicators on the base of the qua- dcopter are flashing, this indicates that the battery is low and that the quadcopter should be brought back to land.
high capacity battery
The charging time is about 60 minutes
Hover flying time is approximately 10 minutes
It is recommended to use Syma charging cable only to ensure the safety.
Remote control overview
Model no. : Z4
Remote-controlled vehicle battery : 3.7V/400mAh
Motor : Ø6
Remote control batteries : 4x “AA” batteries (not included)
Dimensions : 31.1 x 29.3 x 5.36 cm
Packaging dimensions : 32.5 x 17.8 x 9 cm
Range : approx. 30 metres
Flight time : approx. 10 minutes
Charging time : approx. 60 minutes
Remote control frequency : 2.4 GHz
Fast/slow mode : Approx 3 m/s in fast mode and 2 m/s in slow mode
Product features : Four stunt modes, one-touch take-off/landing, altitude hold function, 3D flip
function, two-tier protection mechanism
- • Quadcopter X1
- • Remote Control X1
- • Clockwise/anticlockwise propellers X2（A/B）
- • USB charging cable X1
- • Manual X1
- • Propeller protector X4